Loading System Settings.
Please wait...
CONTROL
STATUS
POWER
INPUT
LEVEL
VOLUME
MAIN
-55.0dB
ZONE 2
Master Bed
-80.0dB
ZONE 3
Guest
-0.0dB
ZONE 4
Kitchen
-5.0dB
SYSTEM POWER
MAIN VOLUME
16.5dB
Volume Step
0.5
5.0
MUTE
SETTINGS
Network Name
Network Setup
AirPlay Password
Firmware Update
Standby
MAC Filter
Licenses
Network Name
Click on "APPLY" button to enable the setting.
Note:
It allows strings between 1 to 32 characters long.
Current Network Connection :
MusicCast Network :
Ready
-------------------------------------------------------------------------------------------------------
Network Connection Select :
SSID
Security
Security Key
Direct IP Address
Direct Subnet Mask
----------------------------------------------------------------
DHCP
Off
On
IP Address
Subnet Mask
Default Gateway
DNS Server (P)
DNS Server (S)
Please register the following PIN Code to the access point within two minutes.
Click "APPLY" button to apply settings.
Applying settings will take about 5 seconds.
MAC Address 1
MAC Address 2
MAC Address 3
MAC Address 4
MAC Address 5
MAC Address 6
MAC Address 7
MAC Address 8
MAC Address 9
MAC Address 10
MAC Address
[ Wireless ]
0CB2B764EB4F
[ Wireless Direct ]
0CB2B764EB50
[ Wired ]
AC44F244079A
Off
On
Click on "APPLY" button to enable the MAC address filter.
Note:
Any device with a MAC address not listed above will be denied access
to the device.
Remote Sensor
Off
On
Note:
"Off" : Disables the remote sensor.
"On" : Enables the remote sensor.
Network Standby
Off
On
Auto
Bluetooth Standby
Off
On
Note:
"Off" : Disables the standby function.
"On" : Enables the standby function.
"Auto" : Enables the standby function.
( The unit is set to the power saving mode when the network is disconnected. )
Click on "START" button to start the firmware update
by using the update file stored in a PC.
Current Firmware Version :
2.11
Note:
Firmware update may take about 20 minutes.
Don't turn off the power during the update.
Select the files that you want to update and press the [UPDATE] button.
Note:
Don't turn off the power during the update.
Mode
Off
On
Password
Click on "APPLY" button to enable the setting.
Note:
Password : It allows strings between 1 to 63 characters long.(Ascii Code.)
BACK