Difference between revisions of "Bus Pirate: First steps"
Jostrowski (talk | contribs) |
Jostrowski (talk | contribs) |
||
Line 28: | Line 28: | ||
== [1.] Windows == | == [1.] Windows == | ||
* | ; Check Bus Pirate Version | ||
: Connect via Putty to the Bus Pirate and type <code>i</code> | |||
HiZ>i | |||
Bus Pirate v3b | |||
Firmware v5.10 (r559) Bootloader v4.4 | |||
DEVID:0x0447 REVID:0x3046 (24FJ64GA002 B8) | |||
http://dangerousprototypes.com | |||
: Hardware v3b and v3.5 shipped with '''bootloader v4+, continue below''' | |||
: Hardware v3a and v2go shipped with '''bootloader v2''', please see the [http://dangerousprototypes.com/docs/Bus_Pirate#Bus_Pirate_v3_bootloader_upgradesbootloader upgrade guide] | |||
*; Enter Bus Pirate Bootloader mode (2 options) | |||
: 1. Connect via Putty to the Bus Pirate and type <code>$</code> (! after this you have to close the application otherwise the firmware loader can not connect) | : 1. Connect via Putty to the Bus Pirate and type <code>$</code> (! after this you have to close the application otherwise the firmware loader can not connect) | ||
: 2. Connect the two pins: PGD and PGC (see image: [http://dangerousprototypes.com/docs/images/thumb/2/26/Bpv3-upgrade-jumper.jpg/250px-Bpv3-upgrade-jumper.jpg]) | : 2. Connect the two pins: PGD and PGC (see image: [http://dangerousprototypes.com/docs/images/thumb/2/26/Bpv3-upgrade-jumper.jpg/250px-Bpv3-upgrade-jumper.jpg]) | ||
* Download: https://github.com/mikebdp2/Bus_Pirate.git | * Download: https://github.com/mikebdp2/Bus_Pirate.git | ||
* Navigate to Bus_Pirate\BPv3-bootloader\ds30_Loader_GUI | * Navigate to Bus_Pirate\BPv3-bootloader\ds30_Loader_GUI | ||
* Run 'ds30 Loader GUI.exe' | *; Run 'ds30 Loader GUI.exe' | ||
* Click Connect / and select the firware image (found under Bus_Pirate\package_latest\BPv3\bpv3_fw7.0_opt2_18092016.hex) | * Click Connect / and select the firware image (found under Bus_Pirate\package_latest\BPv3\bpv3_fw7.0_opt2_18092016.hex) | ||
* Click Load | * Click Load | ||
Line 41: | Line 53: | ||
=== Communicate with the Bus Pirate === | === Communicate with the Bus Pirate === | ||
;Install minicom serial reader/writer | ; Install minicom serial reader/writer | ||
:<code> sudo apt install minicom</code> | : <code> sudo apt install minicom</code> | ||
;Connect BusPirate to the computer | ; Connect BusPirate to the computer | ||
:Check on what port the Bus Pirate connected to: | : Check on what port the Bus Pirate connected to: | ||
:<code>dmesg | tail</code> | : <code>dmesg | tail</code> | ||
j@laptop:~$ dmesg | tail | j@laptop:~$ dmesg | tail | ||
Line 59: | Line 71: | ||
[ 765.891161] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0 | [ 765.891161] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0 | ||
;Configure minicom | ; Configure minicom | ||
:<code>minicom -s</code> | : <code>minicom -s</code> | ||
:select <code>Serial port setup</code> | : select <code>Serial port setup</code> | ||
:set to following parameters: | : set to following parameters: | ||
+-----------------------------------------------------------------------+ | +-----------------------------------------------------------------------+ | ||
Line 76: | Line 88: | ||
+-----------------------------------------------------------------------+ | +-----------------------------------------------------------------------+ | ||
:Then <code>Save setup as dfl</code> | : Then <code>Save setup as dfl</code> | ||
;Connect to Bus Pirate | ; Connect to Bus Pirate | ||
:<code>sudo minicom</code> | : <code>sudo minicom</code> | ||
:Press Enter and following should be displayed: | : Press Enter and following should be displayed: | ||
Welcome to minicom 2.7.1 | Welcome to minicom 2.7.1 | ||
OPTIONS: I18n | OPTIONS: I18n | ||
Line 89: | Line 101: | ||
'''If <code>Hiz/></code> is not being displayed the connection was not successful | '''If <code>Hiz/></code> is not being displayed the connection was not successful | ||
;Get Bus Pirate version | ; Get Bus Pirate version | ||
:Enter: <code>i</code> | : Enter: <code>i</code> | ||
HiZ>i | HiZ>i | ||
Line 106: | Line 118: | ||
=== Update Firmware === | === Update Firmware === | ||
Build the [source code yourself] | ;2 Options: | ||
# Build the [http://dangerousprototypes.com/docs/Compile_the_Bus_Pirate_firmware source code yourself] | |||
# Or use a precompiled binary of the firmware: (easier) | |||
; Download firmware v7 for Bus Pirate v3.6 | |||
;Download firmware v7 for Bus Pirate v3.6 | : <code>git clone https://github.com/mikebdp2/Bus_Pirate.git</code> | ||
:<code>git clone https://github.com/mikebdp2/Bus_Pirate.git</code> | : <code>cd Bus_Pirate/BPv3-bootloader/pirate-loader</code> | ||
:<code>cd Bus_Pirate/BPv3-bootloader/pirate-loader</code> | : <code>cmake .</code> | ||
:<code>cmake .</code> | : <code>make</code> | ||
:<code>make</code> | ; Enter Bootloader (2 options): | ||
;Enter Bootloader (2 options): | : 1. connect via some serial terminal (eg. minicom) and enter <code>$</code> (! after this you have to close the application otherwise the firmware loader can not connect) | ||
:1. connect via some serial terminal (eg. minicom) and enter <code>$</code> (! after this you have to close the application otherwise the firmware loader can not connect) | : 2. connect the two pins: PGD and PGC (see image: [http://dangerousprototypes.com/docs/images/thumb/2/26/Bpv3-upgrade-jumper.jpg/250px-Bpv3-upgrade-jumper.jpg]) | ||
:2. connect the two pins: PGD and PGC (see image: [http://dangerousprototypes.com/docs/images/thumb/2/26/Bpv3-upgrade-jumper.jpg/250px-Bpv3-upgrade-jumper.jpg]) | ; Load the precompiled hex: | ||
;Load the precompiled hex: | : <code>pirate-loader --dev=X --hex=Y</code> | ||
:<code>pirate-loader --dev=X --hex=Y</code> | : X..Serial Port (usally /dev/ttyUSB0) | ||
:X..Serial Port (usally /dev/ttyUSB0) | : Y..firmware image (found under Bus_Pirate/package_latest/BPv3/bpv3_fw7.0_opt2_18092016.hex) | ||
:Y..firmware image (found under Bus_Pirate/package_latest/BPv3/bpv3_fw7.0_opt2_18092016.hex) | |||
== Used Hardware == | == Used Hardware == |
Revision as of 14:24, 11 November 2019
Summary
Here the upgrade process for the Bus Pirate v3.6 will be showcased for [1.] Windows using the GUI application and for [2.] Linux using the console application.
This will use the tutorial provided by the manufacture and the github repository
Description
The Bus Pirate is an open source hacker multi-tool that talks to electronic stuff. It's got a bunch of features an intrepid hacker might need to prototype their next project. The Bus Pirate is used through a simple terminal interface.
Protocols
- 1-Wire
- I2C
- SPI
- JTAG
- Asynchronous serial
- MIDI
- PC keyboard
- HD44780 LCD
- 2- and 3-wire libraries with bitwise pin control
- Scriptable binary bitbang, 1-Wire, I2C, SPI, and UART modes.
Application Support
- AVRDude AVR programmer (AVRDude v5.8+, firmware v4 (any) or v5.9+)
- OpenOCD JTAG debugger
- flashrom bios/flash programmer
[1.] Windows
- Check Bus Pirate Version
- Connect via Putty to the Bus Pirate and type
i
HiZ>i Bus Pirate v3b Firmware v5.10 (r559) Bootloader v4.4 DEVID:0x0447 REVID:0x3046 (24FJ64GA002 B8) http://dangerousprototypes.com
- Hardware v3b and v3.5 shipped with bootloader v4+, continue below
- Hardware v3a and v2go shipped with bootloader v2, please see the upgrade guide
- Enter Bus Pirate Bootloader mode (2 options)
- 1. Connect via Putty to the Bus Pirate and type
$
(! after this you have to close the application otherwise the firmware loader can not connect) - 2. Connect the two pins: PGD and PGC (see image: [1])
- Download: https://github.com/mikebdp2/Bus_Pirate.git
- Navigate to Bus_Pirate\BPv3-bootloader\ds30_Loader_GUI
- Run 'ds30 Loader GUI.exe'
- Click Connect / and select the firware image (found under Bus_Pirate\package_latest\BPv3\bpv3_fw7.0_opt2_18092016.hex)
- Click Load
[2.] Linux
Communicate with the Bus Pirate
- Install minicom serial reader/writer
sudo apt install minicom
- Connect BusPirate to the computer
- Check on what port the Bus Pirate connected to:
dmesg | tail
j@laptop:~$ dmesg | tail [ 760.610683] ftdi_sio 1-1.2:1.0: device disconnected [ 765.780110] usb 1-1.2: new full-speed USB device number 7 using xhci_hcd [ 765.887218] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6001 [ 765.887224] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 765.887227] usb 1-1.2: Product: FT232R USB UART [ 765.887230] usb 1-1.2: Manufacturer: FTDI [ 765.887233] usb 1-1.2: SerialNumber: A907NRH0 [ 765.890644] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected [ 765.890768] usb 1-1.2: Detected FT232RL [ 765.891161] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
- Configure minicom
minicom -s
- select
Serial port setup
- set to following parameters:
+-----------------------------------------------------------------------+ | A - Serial Device : /dev/ttyUSB0 | | B - Lockfile Location : /var/lock | | C - Callin Program : | | D - Callout Program : | | E - Bps/Par/Bits : 115200 8N1 | | F - Hardware Flow Control : No | | G - Software Flow Control : No | | | | Change which setting? | +-----------------------------------------------------------------------+
- Then
Save setup as dfl
- Connect to Bus Pirate
sudo minicom
- Press Enter and following should be displayed:
Welcome to minicom 2.7.1 OPTIONS: I18n Compiled on Aug 13 2017, 15:25:34. Port /dev/ttyUSB0, 16:23:34 Press CTRL-A Z for help on special keys HiZ>
If Hiz/>
is not being displayed the connection was not successful
- Get Bus Pirate version
- Enter:
i
HiZ>i Bus Pirate v3b Firmware v5.10 (r559) Bootloader v4.4 DEVID:0x0447 REVID:0x3046 (24FJ64GA002 B8) http://dangerousprototypes.com
Hardware v3b and v3.5 shipped with bootloader v4+, continue below
Hardware v3a and v2go shipped with bootloader v2, please see the upgrade guide
For all commands visit the manufactures website
Update Firmware
- 2 Options
- Build the source code yourself
- Or use a precompiled binary of the firmware: (easier)
- Download firmware v7 for Bus Pirate v3.6
git clone https://github.com/mikebdp2/Bus_Pirate.git
cd Bus_Pirate/BPv3-bootloader/pirate-loader
cmake .
make
- Enter Bootloader (2 options)
- 1. connect via some serial terminal (eg. minicom) and enter
$
(! after this you have to close the application otherwise the firmware loader can not connect) - 2. connect the two pins: PGD and PGC (see image: [2])
- Load the precompiled hex
pirate-loader --dev=X --hex=Y
- X..Serial Port (usally /dev/ttyUSB0)
- Y..firmware image (found under Bus_Pirate/package_latest/BPv3/bpv3_fw7.0_opt2_18092016.hex)
Used Hardware
Bus Pirate v3.6 Universal serial interface