Difference between revisions of "Install bluez"
Jump to navigation
Jump to search
| Line 15: | Line 15: | ||
* sudo apt-get install libdbus-1-dev libglib2.0-dev libudev-dev libical-dev libreadline-dev -y | * sudo apt-get install libdbus-1-dev libglib2.0-dev libudev-dev libical-dev libreadline-dev -y | ||
== Step 2: Install BlueZ === | === Step 2: Install BlueZ === | ||
=== Download BlueZ source code === | === Download BlueZ source code === | ||
Revision as of 11:03, 3 March 2020
Summary
This documentation describes how to install bluez (gatttool hcitool) on raspberrypi 3b+
Requirements
- Operating system: Raspbian Buster with desktop
Description
Step 1: Install Dependencies
- sudo apt-get update
- sudo apt-get install libdbus-1-dev libglib2.0-dev libudev-dev libical-dev libreadline-dev -y
Step 2: Install BlueZ
Download BlueZ source code
wget www.kernel.org/pub/linux/bluetooth/bluez-5.52.tar.xz
Uncompress the downloaded file
tar xvf bluez-5.52.tar.xz && cd bluez-5.52
Configure
./configure --prefix=/usr --mandir=/usr/share/man --sysconfdir=/etc --localstatedir=/var --enable-experimental
Compile the source code
make -j4
Install
sudo make install
Reboot Raspberry Pi 3
sudo reboot
=== Verify version ===
bluetoothctl -v
Used Hardware
References
- scribles.net/