Install bluez

From Embedded Lab Vienna for IoT & Security
Revision as of 20:35, 3 March 2020 by Ikramer (talk | contribs) (Ikramer moved page Install bluez gatttool hcitool to Install bluez without leaving a redirect)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Summary

This documentation describes how to install bluez (gatttool hcitool) on raspberrypi 3b+

Requirements

  • Operating system: Raspbian Buster with desktop

Description

Step 1: Install Dependencies

  • sudo apt-get update
  • sudo apt-get install libdbus-1-dev libglib2.0-dev libudev-dev libical-dev libreadline-dev -y

Step 2: Install BlueZ

Download BlueZ source code

wget www.kernel.org/pub/linux/bluetooth/bluez-5.52.tar.xz

Uncompress the downloaded file

tar xvf bluez-5.52.tar.xz && cd bluez-5.52

Configure

./configure --prefix=/usr --mandir=/usr/share/man --sysconfdir=/etc --localstatedir=/var --enable-experimental 

Compile the source code

make -j4

Install

sudo make install

Reboot Raspberry Pi 3

sudo reboot

Verify version

bluetoothctl -v

Used Hardware

raspberry pi 3 b+


References

  • scribles.net/