JTAGulator: Update firmware
Revision as of 11:14, 16 November 2019 by Jostrowski (talk | contribs)
Summary
Description on how to update the firmware of the JTAGualtor
Requirements
- Operating system: Windows
(use a virtual machine, if you don't have windows
if doing so, make sure you add a serial interface to your VM [1])
Updating
- Get current version
- Open a serial connection to the JTAGulator (you can use Putty)
- 115200 bps, 8 data bits, no parity, 1 stop bit
- type
j
:j JTAGulator FW 1.2.2 Designed by Joe Grand, Grand Idea Studio, Inc. Main: jtagulator.com Source: github.com/grandideastudio/jtagulator Support: http://www.parallax.com/support
- Download software
- Download & Install the update tool for windows: Parallax propeller-tool
- Download latest version of the JTAGulator firmware from Github: [2]
- Update the firmware
- Open the propeller-tool
- Make sure the tool can communicate with the JTAGulator
- Go to Run -> Identify Hardware
Used Hardware
Device to be used with this documentation Maybe another device to be used with this documentation
Courses
- A course where this documentation was used (2017, 2018)
- Another one (2018)