JTAGulator: Update firmware

From Embedded Lab Vienna for IoT & Security
Revision as of 11:14, 16 November 2019 by Jostrowski (talk | contribs)
Jump to navigation Jump to search

Summary

Description on how to update the firmware of the JTAGualtor

Requirements

  • Operating system: Windows

(use a virtual machine, if you don't have windows
if doing so, make sure you add a serial interface to your VM [1])

Updating

Get current version
  • Open a serial connection to the JTAGulator (you can use Putty)
115200 bps, 8 data bits, no parity, 1 stop bit
  • type j
:j
JTAGulator FW 1.2.2
Designed by Joe Grand, Grand Idea Studio, Inc.
Main: jtagulator.com
Source: github.com/grandideastudio/jtagulator
Support: http://www.parallax.com/support
Download software
  • Download & Install the update tool for windows: Parallax propeller-tool
  • Download latest version of the JTAGulator firmware from Github: [2]
Update the firmware
  • Open the propeller-tool
  • Make sure the tool can communicate with the JTAGulator
Go to Run -> Identify Hardware


Used Hardware

Device to be used with this documentation Maybe another device to be used with this documentation

Courses

References