Difference between revisions of "Joy-Pi - Pi-Hole"
(Created page with "== Summary == Short writeup of using the Joy-Pi case with a Pi-Hole installation, used e.g. for the Open House demo == Requirements == * Operating system: latest Raspbian...") |
m |
||
| Line 22: | Line 22: | ||
Currently the Raspi is configured to use the eduroam Wifi. In order to do so, modify the /etc/wpa_supplicant/wpa_supplicant.conf as follows: | Currently the Raspi is configured to use the eduroam Wifi. In order to do so, modify the /etc/wpa_supplicant/wpa_supplicant.conf as follows: | ||
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev | <nowiki>ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev | ||
update_config=1 | update_config=1 | ||
country=AT | country=AT | ||
| Line 35: | Line 35: | ||
phase1="peaplabel=0" | phase1="peaplabel=0" | ||
phase2="auth=MSCHAPV2" | phase2="auth=MSCHAPV2" | ||
} | }</nowiki> | ||
Since there is a bug in the wpa_supplicant >= 2.8 when trying to connect to enterprise Wifis, downgrade to 2.4 or later, under | Since there is a bug in the wpa_supplicant >= 2.8 when trying to connect to enterprise Wifis, downgrade to 2.4 or later, under | ||
Revision as of 09:39, 13 November 2019
Summary
Short writeup of using the Joy-Pi case with a Pi-Hole installation, used e.g. for the Open House demo
Requirements
- Operating system: latest Raspbian
- Packages: pihole
Description
Step 1
Install Raspbian and pihole according to their respective documentations
Step 2
Currently the Raspi is configured to use the eduroam Wifi. In order to do so, modify the /etc/wpa_supplicant/wpa_supplicant.conf as follows:
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 country=AT network={ ssid="eduroam" proto=RSN key_mgmt=WPA-EAP eap=PEAP identity="USER@HOST" password="PASSWORD" phase1="peaplabel=0" phase2="auth=MSCHAPV2" }
Since there is a bug in the wpa_supplicant >= 2.8 when trying to connect to enterprise Wifis, downgrade to 2.4 or later, under wpa_supplicant for Raspberry Pi
Connect using sudo wpa_supplicant -i wlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf
There is a Bash script in the /home/pi directory, periodically circling through different webpages (just using wget in an infinite while loop).
Access the Pi-Hole Frontend under pi.hole/admin
Used Hardware
Courses
Open House November 2019