Difference between revisions of "Joy-Pi - Pi-Hole"
(Added description for LED examples) |
m |
||
Line 50: | Line 50: | ||
=== Step 3 === | === Step 3 === | ||
To use some of the demos from the Joy-Pi Script Package ([https://joy-it.net/files/files/Produkte/RB-JoyPi/Joy-Pi.zip Joy-Pi.zip], namely those for the 7-segment and Matrix LEDs: | To use some of the demos from the Joy-Pi Script Package ([https://joy-it.net/files/files/Produkte/RB-JoyPi/Joy-Pi.zip Joy-Pi.zip]), namely those for the 7-segment and Matrix LEDs: | ||
* Activate I2C and SPI <pre> sudo raspi-config -> 5 Interfacing Options, enable SPI, enable I2C </pre> | * Activate I2C and SPI <pre> sudo raspi-config -> 5 Interfacing Options, enable SPI, enable I2C </pre> |
Latest revision as of 12:40, 13 November 2019
Summary
Short writeup of using the Joy-Pi case with a Pi-Hole installation, used e.g. for the Open House demo
Requirements
- Operating system: latest Raspbian
- Packages: pihole
Description
Step 1
Install Raspbian and pihole according to their respective documentations
Step 2
Currently the Raspi is configured to use the eduroam Wifi. In order to do so, modify the /etc/wpa_supplicant/wpa_supplicant.conf as follows:
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 country=AT network={ ssid="eduroam" proto=RSN key_mgmt=WPA-EAP eap=PEAP identity="USER@HOST" password="PASSWORD" phase1="peaplabel=0" phase2="auth=MSCHAPV2" }
Since there is a bug in the wpa_supplicant >= 2.8 when trying to connect to enterprise Wifis, downgrade to 2.4 or later, under wpa_supplicant for Raspberry Pi
Connect using
sudo wpa_supplicant -i wlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf
There is a Bash script in the /home/pi directory, periodically circling through different webpages (just using wget in an infinite while loop).
Access the Pi-Hole Frontend under pi.hole/admin
Step 3
To use some of the demos from the Joy-Pi Script Package (Joy-Pi.zip), namely those for the 7-segment and Matrix LEDs:
- Activate I2C and SPI
sudo raspi-config -> 5 Interfacing Options, enable SPI, enable I2C
- For the 7-segment display: install the Adafruit Python LED Backpack Package (Adafruit)
- For the Matrix LED: install the Luma LED-Matrix package (Luma)
Used Hardware
Courses
Open House November 2019