Difference between revisions of "Odroid weather board 2 for Odroid"
Jump to navigation
Jump to search
Stuffsyncbot (talk | contribs) (Automatic device update) |
Stuffsyncbot (talk | contribs) (Automatic device update) |
||
| Line 1: | Line 1: | ||
{{Device|device_name=Odroid weather board 2 for Odroid|manufacturer=|link=|image_link=https://stuff.elvis.science/uploads/accessories/accessory-image-ikW6xsWa64.jpg|description=|technicalSpecification=|supportedTechnologies=|includedEquipment=|elviscategory=}} | {{Device|device_name=Odroid weather board 2 for Odroid|manufacturer=|link=https://www.odroid.nl/odroid-weather-board2|image_link=https://stuff.elvis.science/uploads/accessories/accessory-image-ikW6xsWa64.jpg|description=Best low-cost environmental sensing solution with BME280 and Si1132 on one board. | ||
The combination of the BME280 sensor and the Si1132 sensor enables measuring temperature, barometric pressure and humidity, UV Index and ambient light at once. | |||
6pin header socket is already soldered. You can simply plug it on to the right connector. | |||
- Dimension is only 16.7 x 16.4 mm | |||
- Sensors : BME280, Si1132 | |||
- Recommended working voltage : 1.75 ~ 3.6 Volt | |||
Brand: Hard Kernel | |||
https://www.odroid.nl/odroid-weather-board2|technicalSpecification=BME280 (Humidity), Si1132 (UV Index and Ambient Light Sensor)|supportedTechnologies=BME280, Si1132|includedEquipment=Odroid Weather Board 2|elviscategory=IoT Development}} | |||
Latest revision as of 17:50, 1 February 2024
| Name | Odroid weather board 2 for Odroid |
| Manufacturer | |
| Link | https://www.odroid.nl/odroid-weather-board2 |
| Specification | BME280 (Humidity), Si1132 (UV Index and Ambient Light Sensor) |
| Technologies | BME280, Si1132 |
| Included equipment | Odroid Weather Board 2 |
|
Description
Best low-cost environmental sensing solution with BME280 and Si1132 on one board.
The combination of the BME280 sensor and the Si1132 sensor enables measuring temperature, barometric pressure and humidity, UV Index and ambient light at once.
6pin header socket is already soldered. You can simply plug it on to the right connector.
- Dimension is only 16.7 x 16.4 mm - Sensors : BME280, Si1132 - Recommended working voltage : 1.75 ~ 3.6 Volt
Brand: Hard Kernel
https://www.odroid.nl/odroid-weather-board2