Difference between revisions of "Proxmark3 RDV4"
Jostrowski (talk | contribs) |
Jostrowski (talk | contribs) |
||
Line 1: | Line 1: | ||
== Summary == | == Summary == | ||
The Proxmark is an RFID swiss-army tool, allowing for both high and low level interactions with the vast majority of RFID/NFC tags and systems | The Proxmark is an RFID swiss-army tool, allowing for both high and low-level interactions with the vast majority of RFID/NFC tags and systems worldwide (proxmark.com). | ||
The Proxmark3 Dev Kit 4 (RDV4) is more compact and portable than the older versions and brings various improvements to the open source design. Antennas are highly customizable and there is a new multifunction multiplexing interface to support additional components such as external battery, external active high powered antenna, | The Proxmark3 Dev Kit 4 (RDV4) is more compact and portable than the older versions and brings various improvements to the open-source design. Antennas are highly customizable and there is a new multifunction multiplexing interface to support additional components such as external battery, external active high powered antenna, Bluetooth interfaces and SIM/Smart card reader (hackerwarehouse.com). | ||
== Requirements == | == Requirements == | ||
Line 9: | Line 9: | ||
* Proxmark3 RDV4 | * Proxmark3 RDV4 | ||
To use the | To use the Bluetooth module & for new features of the RDV4 use the new [https://github.com/RfidResearchGroup/proxmark3.git new repository] | ||
Setting-up & compiling are explained in the [https://github.com/RfidResearchGroup/proxmark3/blob/master/doc/md/Installation_Instructions/Linux-Installation-Instructions.md original documentation] | Setting-up & compiling are explained in the [https://github.com/RfidResearchGroup/proxmark3/blob/master/doc/md/Installation_Instructions/Linux-Installation-Instructions.md original documentation] | ||
Line 19: | Line 19: | ||
With the Blue-Shark Module it is now possible to wirelessly communicate with the Proxmark RDV4! | With the Blue-Shark Module it is now possible to wirelessly communicate with the Proxmark RDV4! | ||
To enable this feature you need to install the newest RfidResearchGroup/proxmark3 repo and enable the | To enable this feature you need to install the newest RfidResearchGroup/proxmark3 repo and enable the Bluetooth setting in the makefile: please follow the instructions at [https://github.com/RfidResearchGroup/proxmark3/blob/master/doc/bt_manual_v10.md Blue Shark Installation] | ||
== Smart Card | |||
Revision as of 19:57, 28 January 2020
Summary
The Proxmark is an RFID swiss-army tool, allowing for both high and low-level interactions with the vast majority of RFID/NFC tags and systems worldwide (proxmark.com).
The Proxmark3 Dev Kit 4 (RDV4) is more compact and portable than the older versions and brings various improvements to the open-source design. Antennas are highly customizable and there is a new multifunction multiplexing interface to support additional components such as external battery, external active high powered antenna, Bluetooth interfaces and SIM/Smart card reader (hackerwarehouse.com).
Requirements
- Proxmark3 RDV4
To use the Bluetooth module & for new features of the RDV4 use the new new repository
Setting-up & compiling are explained in the original documentation
For a quick introduction to the default commands please visit: Proxmark3: Useful commands
Bluetooth Module
With the Blue-Shark Module it is now possible to wirelessly communicate with the Proxmark RDV4!
To enable this feature you need to install the newest RfidResearchGroup/proxmark3 repo and enable the Bluetooth setting in the makefile: please follow the instructions at Blue Shark Installation
== Smart Card
Used Hardware
Proxmark3 RDV4.0 BT & Battery Addon Blue Shark
Courses
References
- proxmark.com
- hackerwarehouse.com