Proxmark3 RDV4

From Embedded Lab Vienna for IoT & Security
Revision as of 21:49, 27 January 2020 by Jostrowski (talk | contribs)
Jump to navigation Jump to search

Summary

The Proxmark is an RFID swiss-army tool, allowing for both high and low level interactions with the vast majority of RFID/NFC tags and systems world-wide (proxmark.com).

The Proxmark3 Dev Kit 4 (RDV4) is more compact and portable than the older versions and brings various improvements to the open source design. Antennas are highly customizable and there is a new multifunction multiplexing interface to support additional components such as external battery, external active high powered antenna, bluetooth interfaces and SIM/Smart card reader (hackerwarehouse.com).

Requirements

  • Proxmark3 RDV4

To use the bluetooth module & for new features of the RDV4 use the new new repository

Setting-up & compiling are explained in the original documentation

For a quick introduction to the default commands please visit: Proxmark3: Useful commands

Bluetooth Module

With the Blue-Shark Module it is now possible to wirelessly communicate with the Proxmark RDV4!

To enable this feature you need to install the newest RfidResearchGroup/proxmark3 repo and enable the bluetooth setting in the makefile: please follow the instructions at Blue Shark Installation


Used Hardware

Proxmark3 RDV4 Kit

Proxmark3 RDV4.0 BT & Battery Addon Blue Shark

Proxmark3 RDV4.0 HF Antennas

Proxmark3 RDV4.0 LF Antennas

Courses

References

  • proxmark.com
  • hackerwarehouse.com