Raspberry Pi 3B+ 802.15.4/6LoWPAN Setup
Revision as of 18:26, 27 November 2023 by TBuchi (talk | contribs) (Created page with "== Summary == Information on how to setup a Raspberry Pi 3B+ for 802.15.4 radio/6LoWPAN communication by utilizing an Openlabs 802.15.4 radio module. '''This was tested successfully with Raspbian Buster and Raspbian Bullseye.''' == Requirements == * Raspberry Pi 3B+ (https://wiki.elvis.science/index.php?title=Raspberry_Pi_3,_Model_B+,_WLAN,_BT) * Operating system: Raspberry Pi OS (Raspbian) * Openlabs 802.15.4 radio module: https://openlabs.co/store/Raspberry-...")
Summary
Information on how to setup a Raspberry Pi 3B+ for 802.15.4 radio/6LoWPAN communication by utilizing an Openlabs 802.15.4 radio module.
This was tested successfully with Raspbian Buster and Raspbian Bullseye.
Requirements
- Raspberry Pi 3B+ ([[1]])
- Operating system: Raspberry Pi OS (Raspbian)
- Openlabs 802.15.4 radio module: https://openlabs.co/store/Raspberry-Pi-802.15.4-radio
Description
Install Raspbian on Raspberry Pi 3B+
- Use Raspberry Pi Imager
- Optional: Download Raspbian/Raspberry Pi OS from https://www.raspberrypi.com/software/operating-systems/
Preparation of Raspbian
Access the Raspberry Pi by attaching it via HDMI to a monitor. After enabling SSH it is possible to connect via SSH/terminal (default credentials are pi:raspberry).
- (Optionally) Change keyboard setting to "German" and reboot:
sudo dpkg-reconfigure keyboard-configuration
- Activate and start SSH on Raspberry:
sudo systemctl start ssh sudo systemctl enable ssh
- Upgrade of Raspbian:
sudo apt update && sudo apt upgrade
Enable support for IEEE 802.15.4/LoWPAN devices
Used Hardware
Courses
- IT-Security master's programme: Mobile and Embedded Security ILV