Difference between revisions of "Technaxx SmartAlarm TX-84: Installation"
Jump to navigation
Jump to search
Jostrowski (talk | contribs) (Created page with "== Summary == The alarm system with Basis Station, PIR Sensor, Door & Window contact, Remote and Alarm Siren is a basic kit for a home security system. == Installation ==...") |
Jostrowski (talk | contribs) m (typo) |
||
| Line 21: | Line 21: | ||
2. Insert battery of the Sensor | 2. Insert battery of the Sensor | ||
3. | 3. The base station sends out an audible beep (if not repeat set 2) | ||
[[Category:Documentation]] | [[Category:Documentation]] | ||
Latest revision as of 10:14, 30 January 2020
Summary
The alarm system with Basis Station, PIR Sensor, Door & Window contact, Remote and Alarm Siren is a basic kit for a home security system.
Installation
Step 11: Press the blue button on the base station for 6 seconds, and then let it go.
Now it should slowly blink blue, proceed with Step 12.
After that is should start to blink red. On the phone it will say "Connection successful" and the light of the base station should be blue again.
Add the Door and Window Contact to the base station
1. Press the blue button of the base station
2. Insert battery of the Sensor
3. The base station sends out an audible beep (if not repeat set 2)