Technaxx SmartAlarm TX-84: Installation
Revision as of 12:35, 30 October 2019 by Jostrowski (talk | contribs) (Created page with "== Summary == The alarm system with Basis Station, PIR Sensor, Door & Window contact, Remote and Alarm Siren is a basic kit for a home security system. == Installation ==...")
Summary
The alarm system with Basis Station, PIR Sensor, Door & Window contact, Remote and Alarm Siren is a basic kit for a home security system.
Installation
Step 11: Press the blue button on the base station for 6 seconds, and then let it go.
Now it should slowly blink blue, proceed with Step 12.
After that is should start to blink red. On the phone it will say "Connection successful" and the light of the base station should be blue again.
Add the Door and Window Contact to the base station
1. Press the blue button of the base station
2. Insert battery of the Sensor
3. Base station send out a audible beep (if not repeat set 2)