Technaxx SmartAlarm TX-84: Installation

From Embedded Lab Vienna for IoT & Security
Jump to: navigation, search


The alarm system with Basis Station, PIR Sensor, Door & Window contact, Remote and Alarm Siren is a basic kit for a home security system.


Step 11: Press the blue button on the base station for 6 seconds, and then let it go.

Now it should slowly blink blue, proceed with Step 12.

After that is should start to blink red. On the phone it will say "Connection successful" and the light of the base station should be blue again.

Alarm tx81 installation1.png

Alarm tx81 installation2.png

Add the Door and Window Contact to the base station

1. Press the blue button of the base station

2. Insert battery of the Sensor

3. The base station sends out an audible beep (if not repeat set 2)