UBIQUITI Ethernet Surge Protector, ETH-SP-G2: First Steps
Description
ESD protection for outdoor high-speed networks
Ethernet surge protection, model ETH-SP-G2 from Ubiquiti Networks:
The ETH-SP is a cost-effective solution for outdoor Ethernet devices to protect them from harmful electrostatic discharges and overvoltages.
All Ubiquiti airMAX devices already have an ESD built in, adding the ETH-SP can provide even more protection. The ETH-SP is designed to protect Power over Ethernet (PoE) or non-PoE devices with connection speeds of up to 1Gbps. Two passive surge protectionRJ45 connectors ensure maximum device compatibility.
Ideal für WISP-Netzwerke:
Install two ETH-SPs: one near the terminal and the other at the point of entry into the building. Harmful ESD discharges and overvoltages will be safely discharged by the ETH-SP and absorbed into the ground.
Details
Type | Overvoltage protection |
Colour | white |
EAN | 0817882023900 |
Manufacturer No. | ETH-SP-G2 |
Lightning protection | up to 10000 Ampere |
More information | Temperature (operating): -30 to 65 °C; Humidity (operating): 10 to 90 % non-condensing |
Overview about the hardware
1. ETH input/output port: Passive RJ45 Ethernet ports with surge protection.
2. Grounding point: The ETH-SP-G2 must be grounded in one of the following ways:
➥ Use the supplied self-tapping screws to ground the ETH-SP-G2 directly to a grounded metal post or structure. Alternatively
➥ use an M5 machine screw and nut (not supplied) to attach a ground wire connected to a remote ground block or other grounded object.
ESD Protection for Outdoor PoE Devices
Damaging electrostatic discharge attacks and surges are diverted to the ETH-SP and safely discharged into the ground, so network devices are protected.
Fast Installation
The ETH-SP was designed for easy, plug and play installation:
Used Hardware
➠ Ethernet Surge Protector ETH-SP-G2
References
➠ https://dl.ubnt.com/qsg/ETH-SP-G2/ETH-SP-G2_DE.html
➠ https://www.wlan-shop24.de/ubiquiti-ethernet-surge-protector-eth-sp-g2