Difference between revisions of "Hak5 Bash Bunny"
(Created page with "== Summary == This documentation is about the Bash Bunny from Hak5. This device is an multi-purpose USB Attack platform. == Gain Access to the Bash Bunny == There are thre...") |
|||
Line 12: | Line 12: | ||
'''Windows (Putty)''' | '''Windows (Putty)''' | ||
Putty is the best way t access serial consoles when working on an Windows machine. Just download it on the [https://www.putty.org/ manufacturer website] and install it. | |||
Putty is the best way t access serial consoles when working on an Windows machine. Just download it on the [https://www.putty.org/ manufacturer website] and install it and follow the steps. | |||
Step 1: | |||
Get the comport by entering | |||
[Windows key] device manager [enter] | |||
Extend the "Ports (COM & LPT) line and search for the "USB Serial Device(COM..)" | |||
Step 2: | |||
Open Putty and go to the Serial TAB and enter the following parameters: | |||
{| class="wikitable" | |||
| Serial line to connect to | |||
| COM.. | |||
|- | |||
| Speed (baud) | |||
| 115200 | |||
|- | |||
| Data bits | |||
| 8 | |||
|- | |||
| Stop bits | |||
| 1 | |||
|- | |||
| Parity | |||
| No | |||
|- | |||
| Flow control | |||
| XON/XOFF | |||
|- | |||
|} | |||
Enter these commands in the shell | Enter these commands in the shell |
Revision as of 11:55, 5 June 2020
Summary
This documentation is about the Bash Bunny from Hak5. This device is an multi-purpose USB Attack platform.
Gain Access to the Bash Bunny
There are three main ways to gain access to the Bash Bunny:
- from the File System
- with an Serial Console Interface
- with SSH
Serial Console Interface
The Serial Console Interface can be used when the Bash Bunny is in attack mode. It is independent from the operating system but the ways are different.
Windows (Putty)
Putty is the best way t access serial consoles when working on an Windows machine. Just download it on the manufacturer website and install it and follow the steps.
Step 1:
Get the comport by entering
[Windows key] device manager [enter]
Extend the "Ports (COM & LPT) line and search for the "USB Serial Device(COM..)"
Step 2:
Open Putty and go to the Serial TAB and enter the following parameters:
Serial line to connect to | COM.. |
Speed (baud) | 115200 |
Data bits | 8 |
Stop bits | 1 |
Parity | No |
Flow control | XON/XOFF |
Enter these commands in the shell
echo foo echo bar
Step 2
Make sure to read
- War and Peace
- Lord of the Rings
- The Baroque Cycle
Used Hardware
Device to be used with this documentation Maybe another device to be used with this documentation
Courses
- A course where this documentation was used (2017, 2018)
- Another one (2018)
References
Category:Pentesting