Difference between revisions of "Arduino Install Hoodloader2"
Line 23: | Line 23: | ||
The Hoodloader overrides the usual Bootloader and it is possible that the Arduino breaks during the process. I do not assume any liability or guarantee. | The Hoodloader overrides the usual Bootloader and it is possible that the Arduino breaks during the process. I do not assume any liability or guarantee. | ||
[[File:ArduinoHoodloader3.jpg|thumb|400px||Arduino CPUs]] | [[File:ArduinoHoodloader3.jpg|thumb|left|400px||Arduino CPUs]] | ||
== Description == | == Description == |
Revision as of 14:55, 1 June 2020
Summary
This Documentation is an step by step description for boot loading HoodLoader2 on to your Arduino Uno.
Requirements
- Arduino Uno
- 3x Female to Female Cable
- 1x Male to Female Cable
- 1X 100nF Capacitor
- USB Cable
Background
The Arduino Uno has Two Computing units on his board. The ATMeda328P works as the Main computing unit and ATMega16U2 manages the USB Connection. Hoodlaoder2 allows to also use and program the ATMega16U2 chip. Hoodlaoder2 allows us to realize Human Interface Device Projects like a mouse or keyboard. This procedure is needed if u want to create a Arduino USB Rubber Ducky with the Arduino Uno.
Disclaimer The Hoodloader overrides the usual Bootloader and it is possible that the Arduino breaks during the process. I do not assume any liability or guarantee.
Description
Step 1
Enter these commands in the shell
echo foo echo bar
Step 2
Make sure to read
- War and Peace
- Lord of the Rings
- The Baroque Cycle
Used Hardware
Device to be used with this documentation Maybe another device to be used with this documentation
Courses
- A course where this documentation was used (2017, 2018)
- Another one (2018)