Difference between revisions of "Black Arch VMware Installation"

Revision as of 15:24, 12 April 2021

In this documentation, you will find the necessary steps to set up the Linux distribution Black Arch as a virtual machine in VMware Workstation.

Black Arch Linux Image File: Black Arch Linux 2020.12 amd64 full ISO (download from https://blackarch.org/downloads.html )
VMware Workstation (15.5 is used in this tutorial)

Download the newest Black Arch Linux ISO file from the official website.

Open VMware Workstation and follow these configurations for a successful installation:

Click on File -> New Virtual Machine; a window with the configuration will pop up
Choose Custom as the type of configuration and click Next>
Choose Installer disc image file (iso) and find path to the downloaded Black Arch ISO file, then click Next>
As Guest operating system select Linux and set the Version to Other Linux 5.x or later kernel 64-bit, then click Next>
Set up the VM name, path, and at the processor configuration, go for 1 processor with 2 cores per processor
Set the Memory for this virtual machine to 1024 MB and for network type choose NAT
For SCSI Controller choose the LSI Logic (recommended) and for Disk Type choose SCSI (recommended)
Choose "Create a new virtual disk" and set theMaximum Disk Size to 50 GB;
Choose Store virtual disk as a single file (or Split virtual disk into multiple files if that suits your needs better), then click Next> and Finish

Now you're all set:

Your first login must be as: user root password blackarch

Select Graphical install and set language and country preferences
Set hostname and if you want also the domain name, otherwise skip it
Set up users and passwords
As partitioning method for the disks choose Guided - use entire disk and then just confirm the disk
As partitioning scheme choose All files in one operation (recommended for new users)
Choose Finish partitioning and write changes to disk, and when prompted whether to write the changes to disks, just click yes
You can leave the software selection on default:

Click yes when prompted to install the GRUB boot loader to your primary drive and then as Device for boot loader installation enter /dev/sda; now you should be all set and your installation is finished as soon as the login window pops up

@@ Line 25: / Line 25: @@
 * Choose "Create a new virtual disk" and set the<i>Maximum Disk Size</i> to 50 GB;
 * Choose <i>Store virtual disk as a single file</i> (or <i>Split virtual disk into multiple files</i> if that suits your needs better), then click <i>Next></i> and <i>Finish</i>
-Now you're all set for configuring the Black Arch Linux Installer:
+Now you're all set:
 [[File:Blackarch_installer.png]]
+Your first login must be as:
+user <b>root</b>
+password <b>blackarch</b>
 * Select <i>Graphical install</i> and set language and country preferences
 * Set hostname and if you want also the domain name, otherwise skip it