Difference between revisions of "WiFi Pineapple Nano Basic Manual"

From Embedded Lab Vienna for IoT & Security
Jump to navigation Jump to search
(This documentation explain a basic workflow in the web interface of the WiFI Pineapple Nano)
 
 
Line 7: Line 7:
* Prepare a device that Broadcast an open Wlan SSID
* Prepare a device that Broadcast an open Wlan SSID
* Prepare a device which is connected to the open Wlan
* Prepare a device which is connected to the open Wlan
In order to complete these steps, you must have followed [[Some Other Documentation]] before.


== Description ==
== Description ==
Line 24: Line 22:


=== Step 2 ===
=== Step 2 ===
Check the filters
====Filters:====
====Filters:====
* Go to the Filter Configuration
* Go to the Filter Configuration
Line 31: Line 30:


=== Step 3 ===
=== Step 3 ===
Check the PineAP settings
====PineAP Settings:====
====PineAP Settings:====


Line 42: Line 42:
* In the Death Multiplier enter 2 and press "Deauth"
* In the Death Multiplier enter 2 and press "Deauth"


now the client should be kicked and connect to the broadcasted SSID from the Pineapple Nano. Check it in the "Clients" page.
Now, the client should be kicked and connect to the broadcasted SSID from the Pineapple Nano. Check it in the "Clients" page.




== Used Hardware ==
== Used Hardware ==


[[Wifi Pineapple Nano]]
* [[Wifi Pineapple Nano]]




== Further attacks ==
== Further attacks ==
[[Evil Portal with Wifi Pineapple Nano]]
* [[Evil Portal with Wifi Pineapple Nano]]


== Courses ==
== Courses ==

Latest revision as of 20:54, 8 January 2024

Summary

This documentation explain a basic workflow in the web interface of the WiFI Pineapple Nano

Requirements

Description

Step 1

In the PineAP enable the "PineAP Deamon" and the "Autostart".

Recon:

  • Do a scan
  • In the Recon Scan select the device which is connected to the open wlan and add the MAC address to the filter
  • Optional: Add all probes to PineAP Pool
  • Select the target wlan SSID and add it to the pool.
  • save the recoon scan


Step 2

Check the filters

Filters:

  • Go to the Filter Configuration
  • Check if the target MAC is in the filter
  • The configuration of the MAC filter should be in Allow Mode, so that just devices which are in this list are able to connect.
  • SSID Filter should be blank

Step 3

Check the PineAP settings

PineAP Settings:

In the PineAP select all boxes except "Capture SSIDs to Pool". Because we do not want that all SSIDs we found gonna be broadcasted. After that select "Save PineAP Settings".

Step 4

Force the target to connect with the Pineapple Nano via deauthentication attack.

  • Back to the Recoon page, select the saved scan or do a new one
  • select the target device
  • In the Death Multiplier enter 2 and press "Deauth"

Now, the client should be kicked and connect to the broadcasted SSID from the Pineapple Nano. Check it in the "Clients" page.


Used Hardware


Further attacks

Courses

  • Ausgewählte Kapitel der IT-Security ILV

References

Retrieved from "https://wiki.elvis.science/index.php?title=WiFi_Pineapple_Nano_Basic_Manual&oldid=13843"